Call us Design your lift
Lift sizing tool

Estimate the shaft, then ask us for the drawings.

Enter the car and the door. An indicative shaft, walls, a scaled plan and a guide to the loads update as you type. When it looks right, ask our design team for the AutoCAD drawings and the BIM model of your lift.

Your lift

All sizes in millimetres. Defaults are a starting point.

Car, inside size

Landing door
Guide rails on
Other entrances (optional)
Shaft construction
Check against your shaft (optional)
Heights (optional, for the loads guide)

Pit and overhead are HLA's usual figures. We confirm them for your project.

HLA Hydraulics & Lifting Aids · Lift plan (indicative)
Shaft, clear inside…
Outer size…
Platform…
Capacity guide…

    Loads, as a guide

    Guide values only. Not final. HLA design must check and confirm every figure before it is used in a structural design.

    How these are worked out

      Want the drawings?

      Our design team prepares the AutoCAD (DXF) plan and section, a PDF and a BIM (IFC) model for your lift, and checks the shaft and the loads with you. Send us your project details and we reply by email with the files.

      Request drawings and BIM from HLA →

      Everything on this page is indicative, for early design coordination only. Pit depth and overhead depend on travel and specification, and our engineers confirm them. Final dimensions and loads follow HLA's check and a site survey. Please do not use this page for construction.

      Call us Design your lift